KLIM PIEPS PRO BT (2025)

Pieps Pro BT

The PIEPS PRO BT is the most advanced beacon, with a feature set built for the pro use.

With a smart transmitter that auto-adjusts the sending antenna to give searching beacons the best signal, a huge 60-meter circular range, and mark and scan function for multiple burial scenarios, the PIEPS DSP Pro Avalanche Beacon has all the cutting-edge features pros need.

Features

• EXTENSIVE SELF-CHECK Review of all relevant hardware and software elements as well as showing the current software version.
• PERFECTLY READABLE DISPLAY in all lighting conditions
• VIBRATION at initial signal detection. This lets rescuers focus on the visual surface search during the signal search.
• PERFECT MARK-PERFORMANCE due to exact signal processing without any performance losses
• PIEPS INTERFERENCE PROTECTION The influence of external interferences is eliminated or reduced to a minimum: Protection in send mode with Auto-Antenna-Switch: If the transmitting antenna is impacted by external interference, the other antenna would take over the transmit function. Protection in search mode with Signal
• Verification: Only a verified 457kHz signal is indicated.
• iPROBE SUPPORT The PIEPS PRO BT can be temporarily deactivated using the smart iPROBE. The receiving beacon automatically receives the next strongest signal.
• BACKUP-MODE The PIEPS PRO BT is in send mode but the send signal is temporarily suppressed. So rescuers aren't disturbed during the search.
• AUTO-SEARCH-TO-SEND This function automatically switches the PIEPS PRO BT from search mode to send mode, if the beacon is not moving for a certain time (in case of burial).
• GROUP CHECK Reviews the activity and transmission parameters of the partner device. PIEPS recommends to perform a group check before each tour.
• SCAN-FUNCTION The SCAN-function will give you an overview of all buried devices within the detectable range.
• VICTIM SELECTION The PIEPS PRO BT scans the entire receiving range. The closest 3 victims are indicated.
• ANALOG-MODE The analog mode can be used for specific search strategies as well as for demo reasons.
• TX600-SUPPORT The PIEPS TX600 is a mini-transmitter for dogs and equipment that is transmitting out of the standard EN300718 and can be received with every PIEPS PRO BT.
• INCLINOMETER With the integrated three dimensional inclinometer the the punctual angle of the slope can be measured.
• CARRYING SYSTEM PIEPS PRO BT
• High wearing comfort at low weight
• Neoprene pouch with soft shoulder strap
• Quick-Pull-System for fast access to the device
• Maximum range (m): 60
• Search strip width (m): 60
• Dimensions (mm, LxWxH): 118 x 76 x 29
• Weight (g, incl. batteries): 230
• Power supply: 3 batteries (AAA)
• Battery lifetime (min. h) : 600
• Receiving frequency (kHz): 457
• Transmission frequency (kHz, according to EN300718): 457
• Temperature range: -20°C to +45°C

Product Reviews

No Reviews have been submitted!

Write a Product Review

Ask a Product Question

No Questions have been submitted!

Ask a Product Question